top of page

Self adhesive, reusable, peel and stick wallpaper panels. 

 

Can be installed on virtually any flat surface. 

 

DIMENSIONS

 

IKEA: 31cm x 66cm 

  

-Australian made-

Petit Abode | Garden Bunny Wallpaper

HK$288.00 Regular Price
HK$158.40Sale Price
  • The splashback can be made from MDF, Plywood or Corflute board: all of which are available at your local Bunnings or Home Improvement store.

    The main differences between them are going to be how easy they are to cut to size and then the strength of them once installed.

    If using MDF or Plywood I would ask to have them cut to size whilst still in the store, saves you needing a saw and a clean up session!

    These options will be stronger once installed being solid wood..

    Corflute Board on the other hand is really cheap, you can cut it with scissors in the comfort of your own home and 1 board should yield you THREE splashbacks!

     

    I recommend using a pencil if you are doing this at home, and using the already cut edges so you only need to cut two sides.

    The splashback size needs to be:

    32cm High

    68cm Long 

    This allows for a 1cm overhang above and on either side of the wallpaper so that it can be attached to the back of the kitchen. 

    If using Corflute Board, use either a stanley knife or pair of scissors to cut out the traced backsplash. If using MDF or Plywood you will need something slightly sharper!

    Once you've done that, place it at the back of the IKEA kitchen and make sure its all straight and aligned. 

    Use the straightest edge for the bottom of the splashback. 

    Then, using your pencil, mark 1cm in from the top and sides of the splashback board and trace a line across the top and sides of the board. 

    Our peel and stick wallpaper will sit within these traced lines!

     

    You should now have three straight lines making a 'box' on the splashback board for you to stick our wallpaper within.

    Simply unroll our wallpaper, peel the white backing sheet away from the wallpaper by approximately 10cm, line up the edges with the bottom of the board and your traced lines and simply peel, stick & smooth!

    You can reposition the wallpaper as many times as you need until you get it perfect..

    THE FINAL STEP

    Attaching this bad boy to the Düktig kitchen! Woo, the end is in sight!

    It's completely up to you how you attach it, and the material you used for the backing board of course! If you used MDF or Plywood you can either nail or screw the board directly into the back of the kitchen! If you went with Corflute Board, you can simply use tacks, nails, hot glue or even double sided tape.

    We used velcro strips so that we could constantly change the splashback without needing to reapply our wallpaper! Makes it a cinch.

bottom of page